Chicago Pneumatic 20V 1/2" Impact Wrench Pack 4.0Ah

Order No. CPT-8849K-4AH

Availability: Out of Stock

4 settings in forward, to be set up with the touch pad on the back side of the tool
Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
50%: around 425 ft.lbs / 580 N
100% of maximum torque around 850+ ft.lbs / 1150+ Nm
1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
5 bumpers all around the tool, 1 in front of the clutch housing
Brushless motor
4 Front LED lights for dark spaces
Single-hand forward and reverse operation plus safety locking position
Soft thermoplastic rubber grip
The CP8849 Series is to be used as a snugging tool to come close to the car manufacturer�s specified torque rating
The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening
Torque results could vary greatly depending on the type of wheel and many other factors