The S2-1 Sensorbox is an extension module that interfaces with Launch Professional Line & PAD Series Diagnostic Scan Tools. The S2-1 Sensorbox and the Scan tool are linked through an application. The purpose of the S2-1 Sensorbox is to perform specific testing on for sensors, actuators and electrical components that are normally difficult to diagnosis. The S2-1 works on a standalone basis by mimicking the protocols of the ECM and simulating real world drive conditions and cycles. Technicians are able to analyze in real time , waveforms, cyclical graph data and voltage readings which can be used to deduce sensor issues , electrical issues or high level ECM faults.
Validate concise signal characteristics for vehicle sensors and confirm the range of actuator drive capabilities. These testing parameters streamline the diagnostic process to give the technician relevant and accurate information by a few clicks in formulating diagnostic conclusions
It can simulate valid signals which are actually sent by sensors and with high fault ratio under different driving conditions of vehicle, such as oxygen sensor (Zirconium Oxide, Titanium Oxide), throttle position sensor (5V for 2 signals combined together), accelerator pedal position sensor (voltage 1:2), air flow sensor (digital, analog), water temperature, intake air pressure and more.
View the data stream deed that is backed by a decoder , faults are ruled out and you have the confidence of not replacing unnecessary components.
Simulate driving command signals from the ECU to activate actuators with high fault ratios such as fuel injectors( including Gasoline Direct Injection), VVT Solenoid Valves, Throttle Motors, EGR Valves, Turbo Charger Solenoid Valves and more.
Verify whether the ECU is functioning within normal parameters or not with conclusive evidence for replacing ECU modules.
It can simulate signals of special sensors, such as crankshaft (electromagnetic, Hall), camshaft (electromagnetic, Hall) to perform the setting for missing gear position and phase relation.
Support customizable waveforms and hand-drawn waveforms, which enables technicians to edit and draw out custom waveform patterns on the interface of decoder by themselves .
Capability of simulating 4000 count multimeter (DCV, ACV, Resistance, Diode, Capacitor, On and Off) to assist in pinpoint electrical troubleshooting and diagnostics.
